Quality & Compliance
Documented Quality, From Heat Number to Hydrotest
Fittings are manufactured at our group manufacturing facility, Arshya Engineers & Fabrications Pvt Ltd, which holds ISO 9001, ISO 14001, ISO 45001, PED (TÜV Rheinland), AD 2000-Merkblatt HP 0, EN 764-5, IBR and ASME U-Stamp approvals — with EN 10204 3.1 / 3.2 test certificates on every order. Download the certificates.
Certifications & Approvals
Fittings are manufactured at our group manufacturing facility, Arshya Engineers & Fabrications Pvt Ltd (Village Dundsa, Palwal, Haryana), which holds ISO, PED (TÜV), AD 2000, IBR and ASME approvals. The certificates below are issued to that facility; download the current copies for your vendor file.
9001
ISO 9001:2015
Quality management system
14001
ISO 14001:2015
Environmental management system
45001
ISO 45001:2018
Occupational health and safety
TÜV
PED 2014/68/EU
Material manufacturer QMS certificate (EN 764-5 / AD 2000-Merkblatt W0) for forged and butt-weld fittings and flanges
HP 0
AD 2000-Merkblatt HP 0
Manufacturer qualification, German pressure vessel code
764-5
EN 764-5:2014
Inspection documentation of metallic materials for pressure equipment
APPROVED
IBR approval
Approval granted under IBR 1950 (Forms III-A, III-C and III-G). IBR 2026 applies from 1 October 2026: fittings are certified in Form IV (Part D), formerly Form III-C
ASME U-Stamp
ASME pressure vessel certificate of authorisation
Current certificates
| Certificate | Issued by | Number | Valid to | Copy |
|---|---|---|---|---|
| ISO 9001:2015 | Amtivo | 622103 | 27-10-2026 | |
| ISO 14001:2015 | ICV | IN/93811566/2852 | 18-01-2027 | |
| ISO 45001:2018 | ICV | IN/51816033/4859 | 22-12-2027 | |
| PED 2014/68/EU | TÜV Rheinland (notified body 0035) | 01 202 IND/Q-15 0006.02 | 08-03-2027 | |
| AD 2000-Merkblatt HP 0 | Euroglobe | 183915 | 16-04-2027 | |
| EN 764-5:2014 | Euroglobe | 183916 | 16-04-2027 | |
| IBR approval | Chief Inspector of Boilers, Haryana | Memo 187 | Issued 02-07-2020 | |
| ASME U-Stamp | ASME | 61123 | 25-10-2026 | |
| PED annex (material scope, rev 2) | TÜV Rheinland | Annex to 01 202 IND/Q-15 0006.02 | Dated 24-11-2025 |
Holder of all certificates listed: Arshya Engineers & Fabrications Pvt Ltd, Piyala-Dundsa Road, Village Dundsa, District Palwal, Haryana 121102, India. Renewed certificates replace these copies when issued.
EN 10204 3.1 & 3.2 Test Certificates
EN 10204 defines the types of inspection documents that accompany metallic products. We issue 3.1 certificates as standard and can arrange 3.2 third-party witnessed certificates for projects requiring independent validation.
3.1 Certificate
Issued and validated by our in-house quality department (independent of the production function), confirming the supplied product conforms to the order requirements, with results of specific inspections including chemical analysis and mechanical tests.
- ✓ Standard on all orders
- ✓ Validated by IBR Fittings' own QC department
- ✓ Includes heat numbers, chemical & mechanical test results
3.2 Certificate
Carries the same technical content as a 3.1 certificate but is additionally validated by an authorised third-party inspector (e.g. TUV, Lloyd's Register) or the purchaser's nominated representative, who witnesses testing at our facility.
- ✓ Available on request for project-critical orders
- ✓ Co-validated by an independent inspection body
- ✓ Supports IBR, PED and classed-vessel project documentation
In-House Testing & Inspection Protocols
Supported by the metallurgical laboratory and NDT capabilities within our integrated manufacturing ecosystem, every batch is inspected against a documented test plan (ITP) agreed at order confirmation.
Documentation Package
Every shipment is accompanied by a complete documentation package, tailored to the project's inspection and regulatory requirements:
- ✓EN 10204 3.1 / 3.2 Material Test Certificates — heat-traceable chemical & mechanical results
- ✓IBR Form IV (Part D) (formerly Form III-C) — for boiler-grade piping components, subject to inspector approval
- ✓Certificate of Conformance — confirming compliance with purchase order and applicable ASME / ASTM standards
- ✓Dimensional Inspection Reports — per agreed Inspection & Test Plan (ITP)
- ✓NDT Reports — UT, RT, MPI / DPI as applicable
- ✓PMI Reports — positive material identification per piece or per lot
- ✓Packing List & Certificate of Origin — for export shipments
Third-Party Inspection Agencies
We routinely coordinate witnessed inspections and certificate validation with internationally recognised third-party inspection agencies, including:
Specific agency nomination is confirmed at order placement based on project and end-client requirements.
Frequently Asked Questions
What is the difference between EN 10204 3.1 and 3.2 certificates?
An EN 10204 3.1 certificate is issued and validated by the manufacturer’s own quality department, confirming the product meets order requirements with traceable test results. An EN 10204 3.2 certificate carries the same content but is additionally validated by an independent third-party inspector (such as TUV or Lloyd’s Register) or the purchaser’s authorised representative, who witnesses or reviews the testing.
Are IBR Fittings products approved under the Indian Boiler Regulations?
Yes. Our fittings and flanges are manufactured and documented to meet IBR (Indian Boiler Regulations) requirements, with IBR Form IV (Part D) (formerly Form III-C) documentation available for boiler-grade piping applications, subject to IBR inspecting authority approval on the relevant order.
What testing is performed on every consignment?
Standard testing includes dimensional inspection, visual inspection, chemical composition verification (PMI), mechanical testing (tensile, impact, hardness) and surface NDT. Additional testing such as ultrasonic testing (UT), radiographic testing (RT), hydrostatic testing and third-party witnessed inspection (EN 10204 3.2) is available on request.
More: company facts at a glance.