IBR Fittings · Saudi Arabia
Buttweld fittings and flanges for projects in Saudi Arabia
We supply ASME B16.9 elbows, tees, reducers and caps, and ASME B16.5 flanges, to stockists, contractors and plant owners in the Kingdom, from carbon steel to chrome-moly, stainless and duplex, with EN 10204 3.1 / 3.2 certificates.
Sectors and grades we supply in Saudi Arabia
| Sector | Typical service | Grades we supply |
|---|---|---|
| Oil and gas, refining | Process and utility piping, sour service, fired heaters | WPB, WPL6, WP5, WP9; NACE MR0175 hardness on request |
| Petrochemicals (Jubail, Yanbu) | Process piping, low-temperature and corrosive service | WPB, WPL6, WP316L, WP321 |
| Power generation | Main steam, reheat and boiler piping | WP11, WP22, WP91, WP92 |
| Desalination and seawater | Seawater intake, brine and high-chloride service | duplex S31803 / S32205, super duplex S32750, WP316L |
Shipping and documents
- ✓ Sea freight from Nhava Sheva (Mumbai) to Jeddah Islamic Port, King Abdulaziz Port (Dammam) or Jubail Commercial Port, on FOB, CFR or CIF terms
- ✓ Seaworthy wooden cases or pallets, bevel ends protected, marking to your instructions
- ✓ Commercial invoice, packing list and certificate of origin with every shipment; tell us at enquiry if your importer or forwarder needs any other document
- ✓ Full pre-order checklist: buying pipe fittings from India for Saudi Arabia and UAE projects
- ✓ Lead time: carbon steel (WPB) stock sizes typically 2–4 weeks; alloy steel, large-diameter and high-schedule items confirmed at quotation
Inspection and approvals
Major end users in the region, such as Saudi Aramco, SABIC and the Saudi Electricity Company, buy against approved-manufacturer lists and project specifications. Tell us the end user and specification at enquiry: we will say plainly whether we can meet it, and we support project-specific approval with documents, witnessed inspection and, where required, a manufacturer audit.
- ✓ EN 10204 3.1 certificates as standard; 3.2 witnessed by TÜV, Lloyd’s Register, Bureau Veritas, DNV, SGS or your own inspector
- ✓ PMI, dimensional and visual inspection on every order; UT, RT, MPI or DPI and hydrostatic testing as specified
- ✓ NACE MR0175 / ISO 15156 hardness compliance for sour service on request
- ✓ ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and PED 2014/68/EU certified; heat-number traceability on every piece
Other Gulf markets: Oman · Qatar · United Arab Emirates · العربية · How an export order works
Fitting types: Elbows · Tees · Reducers · Caps · Stub ends · Laterals · Flanges · For Indian projects: IBR approved fittings · ASME B16.9 inspection checklist
Frequently Asked Questions
Do you ship to Dammam and Jeddah?
Yes. We ship sea-packed fittings and flanges from Nhava Sheva (Mumbai) to Jeddah Islamic Port, King Abdulaziz Port in Dammam and Jubail Commercial Port, on FOB, CFR or CIF terms.
Can you supply fittings for sour service?
Yes. We supply carbon and alloy steel fittings with hardness controlled to NACE MR0175 / ISO 15156 when your order specifies it, with the hardness results on the EN 10204 certificate.
Are you on the Saudi Aramco approved manufacturer list?
Tell us the end user and project specification at enquiry. We state our approval status plainly and support project-specific approval with documents and witnessed inspection.